Patio Pacific Logo

The "Endura Flap" Quick Panel III patio pet door is identical to the Thermo Panel III except for the use of single pane glass instead of dual pane glass. It is appropriate for more temperate climates or where a lighter weight panel is desired.  The benefits of the Endura Flap are far more important than whether the glass is single pane or dual pane.

The difference between this panel and the earlier Quick Panel II is that the Quick Panel III uses the new 'Endura' flap--the best performing pet door flap ever made--while the Quick Panel II uses flap assemblies made by other manufacturers.
Features:
  •  New! Extreme Performance 'Endura' flap - The best performing pet door flap ever made.  Tired of replacing worn out, leaking flaps? You owe it to yourself to investigate the Endura Flap.
     
  •  New! Patented, exclusive 'User Adjustable Rise': Lets the user easily adjust  the height of the flap above the base of the pet door to fit taller or shorter dogs (see graphic). This greatly increases the flexibility of the pet door for the future.
     
    •   # 6 may be set to 3" or 5" rise
    •   # 8 may be set to 3", 5", or 7" rise
    •  # 10 may be set to 3", 5", 7" or 9" rise
    •  # 12 may be set to 3", 5", 7", 9" or 11" rise
       
  •  New! 'High Aspect Ratio' design:  Much easier to fit your pet. Improves security for medium to large sized pets. Easier to share with a smaller pet.
     
  •  New! User-adjustable magnet strength: Patio Pacific will offer magnet kits which allow the customer to increase wind resistance or reduce magnet pull for training. Each kit will contain 2 sets of magnets (top and bottom) plus installation clips and instructions.
     
  •  New! 'Green' flap material:  Safe for the environment.
     
  •  Single-pane, extra-heavy glass: Others use 1/8" glass. The Quick Panel III uses 3/16"; a full 50% thicker and much stronger.
     
  •  'No Tools' Installation. No need to drill holes in your sliding glass door frame.
     
  •  Sturdy Locking Cover - Locks pets in or out. Easy to use clip lock is better than the old spring loaded pin locks.
     
  •  'Spring load' design: Can be installed and removed in seconds.
     
  •  Built in 'Anti-Whoops' allows for 3/4" change in adjustment range to accommodate measuring errors.
     
  •  100% Designed and Manufactured in the USA
     
  •  Available in sizes to fit any sliding glass door:
    Standard ranges include 74     3/4" - 77 3/4" and 771/4"-801/4"
    Standard 'Oversize' is 93    1/4"-961/4"

    Custom height ranges include:    3
    Custom undersize < 74"
    Custom oversize 81"-93"
    Custom oversize >96
     
  •  Draft Stopper - Stops air leaks between the stationary and sliding panels.
     
  •  Provision to lock sliding glass door and pet flap securely with a 'pin' type lock
Quick Panel III Selection Table
Size and Stock Number Flap Dimension 'Rise'1
Adjustment Range		 Overall Panel Width Price Buy
# 6
01PPC06S		 6"x11" 3"-5" 111/4" $269
# 8
01PPC08S		 8" x 15" 3"-7" 131/4" $299
# 10
01PPC10S		 10"x19" 3"-9" 151/4" $329
# 12
01PPC12S		 12"x23" 3"-11" 171/4" $369
 
Frame Colors:  
S - Satin (aluminum)
B - Bronze (dark brown) 
W -White		 Height Options: 
P - 74 3/4" -  77 3/4" 
Q - 771/4" -  80 1/4"
R - 93"    -  96"     (additional cost)		  
Custom Height Charges3 Custom Height:   Minimum & Maximum Heights
X -  Under 74"  (no additional cost)
Y -  81"-93"      (additional cost)
Z -  Over 96"     (additional cost)
3  When you order a custom height panel you provide us with your track height measurement in the shopping cart section. We will design a panel especially for you with a height adjustment range of 3" that has your measurement set approximately in the center of that range. 		Model Minimum Maximum
# 6 40" 109"
# 8 46" 115"
# 10 49" 121"
# 12 58" 127"
1 'Rise' is the height of the flap above the base of the pet door. We suggest that 'flap height' + 'rise' should about equal pet shoulder height. Unlike any other panel pet door on the market, the Quick Panel III can be adjusted by the user in 2" increments to the rise dimensions shown. Here's more info on the 'Adjustable Rise'.

Custom orders cannot be resold. Therefore, they must be a final sale once built. Note that the glass units for custom height orders take one to three weeks for delivery from the tempering plant and that we need about 1-2 more weeks to schedule the assembly after the glass unit arrives.
 

 

 

Quick Panel III # 8

 

Recommended Size Limits
Model number = flap width Rise Options
3" 5" 7" 9" 11"
Maximum Height at Withers
# 6 14" 16" n/a n/a n/a
# 8 18" 20" 22" n/a n/a
# 10 22" 24" 26" 28" n/a
# 12 26" 28" 30" 32" 34"